Tag Archives: motor servo

China Best Sales Simotics S Synchronous Servo Geared Motor 1fk7 Compact Gearbox 1fk7032-2ak71-1. U0 cvt gearbox

Product Description

Technical Parameters:
SIMOTICS S Synchronous servo geared motor 1FK7 Compact, 0.50 kW Naturally cooled Power connector rotatable Motor without holding brake Direct gearbox mountingSIMOTICS S Synchronous servo geared motor 1FK7 Compact, 0.50 kW Naturally cooled Power connector rotatable Motor without holding brake Direct gearbox mounting.
1FK7 motors are permanent magnet excited synchronous motors which are available in the versions Compact, High Dynamic and High Inertia. The self-cooled motors are characterized by superior overload capability, ruggedness and compactness. The connection via rotatable connectors and preassembled cables ensures a flexible, fast and safe connection to the converter.

The SIMOTICS S-1FK7 DYA G2 compact geared motor combines electrical and mechanical components in the smallest space possible. This mechatronic unit consists of a permanent-magnet SIMOTICS S-1FK7 synchronous motor and a directly mounted single-stage planetary gearbox.

The SIMOTICS S-1FK7 DYA G2 compact geared motors with IP64 degree of protection are designed for operation without external cooling and the heat is therefore dissipated over the motor surface.

The integrated planetary gearboxes have high maximum torques and permit high radial and axial forces at the shaft extension.

 

Product name

SIMOTICS 1FK7-DYA G2 compact geared motor

Motor type

Permanent-magnet synchronous motor

Magnet material

Rare-earth magnetic material

Cooling

Natural cooling

Temperature monitoring

Pt1000 temperature sensor in the stator winding

Insulation of the stator winding in accordance with EN 60034-1 (IEC 60034-1)

Temperature class 155 (F) for winding temperature rise of ΔT = 100 K at an ambient temperature of 40 °C (104 °F)

Type of construction in accordance with EN 60034-7 (IEC 60034-7)

IM B5 (IM V1, IM V3)
IM B14

Degree of protection in accordance with EN 60034-5 (IEC 60034-5)

IP64

Shaft extension on the drive end in accordance with DIN 748-3 (IEC 60072-1)

With feather key

Shaft and flange accuracy in accordance with DIN 42955 (IEC 60072-1)1)

Tolerance N

Vibration severity in accordance with EN 60034-14 (IEC 60034-14)

Grade A
is maintained up to rated speed

Sound pressure level LpA (1 m) in accordance with EN ISO 1680, max.

 

Application:
Products are widely used in ceramic, glass, food, metallurgy, beer & drink, printing and dyeing, textile, petrochemical engineering, warehouse logistics, wood-working machine, environmental protection equipment, printing and packaging, pharmacy, and leather. 
 

FAQ

Q: What is your MOQ of this item?
A: 5PCS. For the first time cooperation, we accept trial sample order. 

Q: What’s your payment terms?
A: 30% of contract value as deposit via T/T, 70% balance before shipment via T/T or L/C at sight. 
 
Q: What’s the delivery time?
A: 30 days after deposit received.
 
Q: How long is your warranty?
A: 12 months from leave the port.

Office Block

Team
Warehouse

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

worm gearbox

Maintenance Tips for Prolonging the Life of a Worm Gearbox

Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider:

  • Lubrication: Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer.
  • Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat.
  • Temperature Monitoring: Keep an eye on the operating temperature of the gearbox. Excessive heat can degrade the lubricant and damage components.
  • Cleanliness: Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior.
  • Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination.
  • Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency.
  • Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear.
  • Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly.
  • Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions.
  • Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.

By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.

worm gearbox

Energy Efficiency of a Worm Gearbox: What to Expect

The energy efficiency of a worm gearbox is an important factor to consider when evaluating its performance. Here’s what you can expect in terms of energy efficiency:

  • Typical Efficiency Range: Worm gearboxes are known for their compact size and high gear reduction capabilities, but they can exhibit lower energy efficiency compared to other types of gearboxes. The efficiency of a worm gearbox typically falls in the range of 50% to 90%, depending on various factors such as design, manufacturing quality, lubrication, and load conditions.
  • Inherent Losses: Worm gearboxes inherently involve sliding contact between the worm and worm wheel. This sliding contact generates friction, leading to energy losses in the form of heat. The sliding action also contributes to lower efficiency when compared to gearboxes with rolling contact.
  • Helical-Worm Design: Some manufacturers offer helical-worm gearbox designs that combine elements of helical and worm gearing. These designs aim to improve efficiency by incorporating helical gears in the reduction stage, which can lead to higher efficiency compared to traditional worm gearboxes.
  • Lubrication: Proper lubrication plays a significant role in minimizing friction and improving energy efficiency. Using high-quality lubricants and ensuring the gearbox is adequately lubricated can help reduce losses due to friction.
  • Application Considerations: While worm gearboxes might have lower energy efficiency compared to other types of gearboxes, they still offer advantages in terms of compactness, high torque transmission, and simplicity. Therefore, the decision to use a worm gearbox should consider the specific requirements of the application, including the trade-off between energy efficiency and other performance factors.

When selecting a worm gearbox, it’s essential to consider the trade-offs between energy efficiency, torque transmission, gearbox size, and the specific needs of the application. Regular maintenance, proper lubrication, and selecting a well-designed gearbox can contribute to achieving the best possible energy efficiency within the limitations of worm gearbox technology.

worm gearbox

Advantages of Using a Worm Reducer in Mechanical Systems

Worm reducers offer several advantages that make them suitable for various mechanical systems:

  • High Gear Reduction Ratio: Worm gearboxes provide significant speed reduction, making them ideal for applications that require a high gear reduction ratio without the need for multiple gears.
  • Compact Design: Worm reducers have a compact and space-saving design, allowing them to be used in applications with limited space.
  • Self-Locking: Worm gearboxes exhibit self-locking properties, which means that the worm screw can prevent the worm wheel from reversing its motion. This is beneficial for applications where the gearbox needs to hold a load in place without external braking mechanisms.
  • Smooth and Quiet Operation: Worm gearboxes operate with a sliding motion between the teeth, resulting in smoother and quieter operation compared to some other types of gearboxes.
  • High Torque Transmission: Worm gearboxes can transmit high torque levels, making them suitable for applications that require powerful torque output.
  • Heat Dissipation: The sliding action between the worm screw and the worm wheel contributes to heat dissipation, which can be advantageous in applications that generate heat during operation.
  • Stable Performance: Worm reducers offer stable and reliable performance, making them suitable for continuous operation in various industrial and mechanical systems.

Despite these advantages, it’s important to note that worm gearboxes also have limitations, such as lower efficiency compared to other gear types due to the sliding motion and potential for higher heat generation. Therefore, selecting the appropriate type of gearbox depends on the specific requirements and constraints of the application.

China Best Sales Simotics S Synchronous Servo Geared Motor 1fk7 Compact Gearbox 1fk7032-2ak71-1. U0   cvt gearbox	China Best Sales Simotics S Synchronous Servo Geared Motor 1fk7 Compact Gearbox 1fk7032-2ak71-1. U0   cvt gearbox
editor by CX 2024-04-09