WORM SERVO GEAR REDUCER
Features
Wide range of servo gearboxes, made to fit virtually all servo motors found on the market
Designed for the highest torsional stiffness and the cheapest angular backlash, for the maximum torque and overhung loads
Bush with slot machines and hub clamp for servomotor coupling
Benefits
Enhanced dimensional compactness due to direct servomotor coupling
Widest range of possible servomotors coupling dimensions.
The right technical solution because of a comprehensive selection of sizes, gear stages, transmission ratios, designs and non-standard designs.
Catalogs:
Servo equipment reducers (worm, coaxial, helical and bevel helical systems) Catalog SR
Operating instructions:
Operating instructions for equipment reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is pleased to announce the growth of our selection of Servo Reducers, now offering five degrees of precision to meet up any app requirements. The five levels of precision offered allows a machine designer to select the required reducer precision to meet their requirements and their budget. They are available in both in-series and right-angle versions, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Standard applications for these reducers include rotary & linear axis drives, and material handling axis drives. Industries served include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
The installation faces of the HT, HP, E and B versions are identical, making it possible to interchange a unit with an increased or lower accuracy unit if needed.
A wide range of motor couplings and installation flanges are available for the entire reducer range to mount virtually any servo motor and the hollow bore output can be used to install output shafts, pinion shafts, or other drive components.
These reducers are typically selected based on the peak cycle forces, which often happen during accelerations and decelerations. These cycle forces depend on the powered load, the acceleration vs. period profile for the cycle, and any other external forces functioning on the axis. For more selection info, please follow this PDF hyperlink.
For application & selection assistance, please call, fax or email us. Your application details will be reviewed by our engineers, who’ll recommend the best solution for your application.
EP Inc. provides a full selection of modular servo gearboxes /worm reducers. The modular style allows for configurations with motor input flange and output pinion for rack and pinion drives, as well as solid output shafts, Hollow bore output, and insight shafts for all other positioning applications. The modular style allows for universal mounting of the gearbox in virtually any orientation.
They can be used on motors with a NEMA23 standard flange through an adaptor kit. As the gears are naturally angled, they lead to a short total length of the electric motor and its gear.
The series can also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole can also be built on the gear’s output side.
Built with a straightforward and robust design, the series has gearing ratios that range from 6:1 to 75:1. An individual can also customize the materials through the order, so as to match the apparatus to its intended software.
The Precision Planetary Gears of the EPRG series contains a thorough range of low backlash planetary gearboxes, with up to class 3′ precision, available in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to at least one 1:1,000). These models also include versions with dual shaft, right angle shaft and right position output, as well as a full range of adapters for motor mounting, making them with the capacity of meeting the requirements of also the most diverse applications. They are made for make use of with included servo and stepper EP motors, mounted directly or via adaptor flanges, but can also be used with other EP electric motor types. This selection of products is based on years of experience and represents the end result of a decade-long analysis targeted at improving performance.
Maximum precision and dynamics, coupled with exceptional torque density, will be the key requirements specific for reliable servo gearboxes in practice. EP provides servo gearboxes for just about any program and any efficiency range. Our low-backlash planetary and right-angle gearboxes reflect our passion for development and the best levels of precision.
Worm gear reducers provide market advance solution with effectiveness and flexibility. Low quantity of basic models could be applied to a wide variety of power ratings guaranteeing best performance and reduction ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are designed for high-performance mechanical devices. When the motor rate needs to be reduced, the result torque raises and send torque totally to the application form. We believe that clients will appreciate our gear reducer to accomplish their demand. Just check out EP, you can get more details about servo gearheads, servo gearboxes, and gear reducers. We always keep in the years ahead for your support.
Plug the Velocity Reducer in to the desired channel of your receiver, and plug the lead from your own servo (or servo wye) into the man servo lead coming from the circuit plank. The established screw on the blue trim pot, located near the top of the primary circuit board, is used to control the quickness of the servo. Convert the set screw fully clockwise (CW) for normal servo speed without speed reduction, fully counter-clockwise (CCW) for optimum speed reduction, or anywhere in between for partial acceleration reduction. The reddish LED indicates three feasible conditions: Slow Blinking = No Transmission; Solid On = No Speed Reduction; Fast Blinking = Reduced Velocity Setting
Please note that if you make any alter to the speed establishing as the receiver is on, you need to cycle capacity to the receiver (change if off and back again on) for the brand new speed setting to take impact. This circuit can also be utilized in conjunction with this Servo Reverser to trigger flap or retract servos to carefully turn in opposite directions for right function. Instructions are included for easy installation and use.
IMPORTANT NOTE: This product will only focus on a regular, proportional servo. You won’t focus on a retract-type servo, as they do not recognize any servo positions apart from clockwise (CW) and counter-clockwise (CCW). Retract servos can’t be slowed down, actually by a transmitter that includes this function, as their style and electronics do not allow it. Examine the FAQ page to learn more.
This device will reduce the speed of any regular, proportional servo. Connect it between your receiver and the servo (or servos) you wish to control for a far more scale-like movement of flaps or retracts. Adjustable, it could be set to lessen the swiftness of your servo from super-slow motion to no speed decrease at all, with an almost infinite amount of positions in between. Maximum reduction time for a servo to travel 90 degrees is about 14 seconds, minimum period (no reduction) is simply the normal velocity of the servo. Great for reducing or removing the inclination of a plane to “balloon up” when flaps are deployed. It can be utilized to control more than one servo by utilization of a normal servo Y.
This is the new regulated version that can be used on radio 
systems powered by any size or kind of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH batteries, and HV (high voltage) receivers that operate on 2-cell 6.6-8.4 volt Li-Po/Li-Ion/Lifestyle batteries. This unit won’t reduce the voltage likely to your servos.
The EP Gear Reducer is the perfect solution for servomotor applications such as for example packaging devices, gantries, injection molding devices, pick and place, and linear slides.Offered in concentric shaft, correct position solid shaft, and right angle hollow shaft styles with modular adaptor flanges and keyless compressible bushings to quickly mount to any kind of manufacturer’s servo motor. The EP Series helical gears have got slanted teeth compared to spur gears with straight cut teeth, producing a smoother equipment mesh, yielding significantly lower noise levels.
The low backlash EP planetary servo gear units are made for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. They were designed to combine the greatest possible flexibility and cost-efficiency because not every application requires high-performance elements.
They offer a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo gear units are available in the following versions:
PSC = B5 output, simple output shaft
PSKC = B5 output, with keyway
PSCZ = B14, result, smooth output shaft
PSKCZ = B14 output, with keyway
servo gear reducer info and also myths.