worm motor

Worm drive gearbox with motor
worm motor
A robust worm-drive gearbox powered by an MM28 electric motor. Ideal applications where a simple to fit, high torque result is required. Ideal for student based tasks including robots and buggies.
The machine has been designed so that the output shaft could be ‘clicked’ in and out for modification. E.g. cutting down to size. The motor is snap fitted into its cradle to activate the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the motor is not turning. The high gear ratios of 216:1 or 336:1 get this to gearbox appropriate for small strolling robots, lifting mechanisms, and additional applications where large torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to a few amps, making them ideal candidates for the DRV8833 motor driver carrier. Motor overheating can be caused by excessive stalling, also at very low voltages. We advise that you utilize stall-detection sensors, or just view your robot, to ensure that it doesn’t stall for more than a few seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also matches on the smaller threaded end of the shaft, although it is not particularly intended to work with this type of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors will be economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right position worm geared motors established new standards for reliability, effectiveness and economy with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly style offers easy integration today and a truly future proof answer. The Ever-Power gear electric motor offers total versatility in mounting choices includes shaft, base, face, and flange solutions. The motor terminal box can be mounted in option positions rotated in 90º steps around the electric motor frame providing for unparalleled integration possibilities.
Ever-Power gear motors adhere to North American and International standards, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a true total solution for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be utilized outdoors or in wet and dusty environments without the use of additional enclosures. Full rated output is available at the output shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With built-in inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the alternative for applications requiring a corner turn, optional dual output, or an inability for the motor to be back driven. The DC right angle equipment motors are created for constant and intermittent duty procedure. Our right angle equipment reducers were created with several mounting plate options, making them well suited for a number of DC electric motor based applications. We offer 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ time (varies by application)
EP Products Worm Gear Motors are made to generate high torque in a little package size. Worm Gear Motors are excellent for applications that want a self- locking or breaking feature since the output shaft can’t rotate when there’s no power used. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision trim gears, voltages and sizes, EP Products has a DC Worm Gear Motor solution for your application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Devices / Security Gates / Oral Seats / Ambulance Cots & Stretchers Many of our DC Motors could be complimented with among our Worm Gearheads. EP Products will continue to work with you to create and produce a Worm Gear Engine that will optimize the performance of your unique application.
Built to your unique requirements
Motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Lower / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm motor uses a metal gear box for strength and a higher torque output. Due to the special mechanical structure of the worm get the electric motor output shaft is self locking and may not be rotated.
This part uses a two wire connection and supports direction control as well as PWM speed control. Rated voltage is 12v and will accomplish 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear units from EP DRIVESYSTEMS especially show their strength in applications where large gear ratios are necessary. Our worm geared motors happen to be therefore optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions allow simple and effective cleaning of the get system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular style give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are many applications that require drive systems, and each of these has its own unique requirements. The EP series worm equipment motors could be quickly and effectively adapted to fulfill your needs.
Worm gear units impress with their large power density and compact style. If required, we are able to also source them with the highly effective nsd tupH surface area treatment.
As well as the basic EP casing, we offer an extensive type of bolt-on elements to customize the merchandise including torque arms, shaft covers and output flanges. These could be easily field installed, but we will also be happy to assemble the individual components for you.
Discover more about the modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm gear unit SMI
SMI worm gear devices feature a simple, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface conversion makes the product ideally suited for severe and demanding industries like food processing and pharmaceuticals.
Flexible input designs such as NEMA, IEC or immediate motor mounts in extra foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared motor program. The units have got on all sides several fixing possibilities and enable an easy assembling for the client.
Other drive configurationscan be designed by use of built-about accessories (e.g. torque arm and result flanges). The housings are made in light weight construction out of aluminium die cast. Motor attachment is realised in general by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Get Gearbox with Electric motor – incorporating the following features: 1 to 6V voltage rating, 17100 rpm no load quickness, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm vast, 40mm high, a good robust worm drive gearbox powered by an MM28 electric motor (included), most ideal for applications where an easy to match, high torque output is required, nylon housing and gear, requires light oil or perhaps silicon grease lubrication, ideal for student based tasks including robots and buggies.
Most ideal for applications where an easy to fit, high torque end result is required
Ideal for student based projects including robots and buggies
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible Huge torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared motor with self-lock, that is, in the case of motor without electric, the end result axis is definitely fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole electric motor output shaft relatively-short than general gear motor, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the home window, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s electric motor is essential in order to avoid your robot being pushed by your opponent robot. The worm equipment is definitely a better option compared to the spur gear motor. How come worm gear so particular? Take a look wiki out: Worm Drive.
“Unlike with ordinary gear trains, the direction of transmission (input shaft vs output shaft) isn’t reversible when using large reduction ratios, due to the better friction involved between the worm and worm-wheel, when usually a single start (one spiral) worm is used. This can be an advantage when it is desired to get rid of any possibility of the result driving the input.”
In other terms, it is hard to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g